Flip Up Safety Rails Installation

Straight Grab Bars
Custom Config Bars
Shower Seats
Flip-Up Safety Rails
Mounting Hardware
Collapsible Dam
Healthcraft

 

 

Flip Up Safety Rails Installation

Installing the Flip Up Safety Rails is not difficult but will require an experienced carpenter or handyman.
You will need experience in light framing, drilling and installing ceramic tile may be required.
We recommend installation by a qualified tradesman.

NOT DESIGNED FOR SIDE PULL/STRESS..........DESIGNED ONLY FOR UP AND DOWN MOVEMENT!

Tools required:
Electric drill, masonry bit, punch.

Typical installation:
The typical shower wall surround may be a 2x4 wood stud frame, covered with gypsum drywall, tile board or plaster. The shower wall finish is usually ceramic tile. These materials alone are not adequate to support the fold down seat unless you can mount into existing wood blocking or wall studs. You can use a 1/8th-inch masonry bit, drill through the tile grout to determine if studs are in place.

Strong wall support is required:
Installation of the Flip Up Safety Rails requires wood blocking in a typical stud wall. This is not a problem in new construction. We suggest installing continuous 2 x 12 wood blocking between the studs, starting from the floor plate up to at least 24 inches above the shower floor. Remodeling an existing shower can be more involved. If the shower backs up to an interior wall, consider removing the wallboard and installing the blocking from the backside. If not, it may be required to remove and replace a portion of the existing shower wall tile.

Anchoring hardware requirements:
Once the wood blocking is in place and the wall finish has been installed, mounting the Flip Up Safety Rail is simple. Position the Flip Up Safety Rail at the required height, normally 30-33 inches above the floor. Use a marker to mark the flange and wall bracket screw locations. Use a punch and hammer to carefully nick the tile to prevent the drill bit from wondering. Use a masonry bit and drill through the tile. All anchoring hardware must be carefully selected to insure proper installation.

OUR FLIP-UP SAFETY RAILS ARE ONLY AS STRONG AS THE MOUNTING HARDWARE CHOSEN AND THE WALLS ON WHICH THEY ARE MOUNTED.

 

----------------------------------------------------

Buy SSL Certificate
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
   
sales@grabbarspecialists.com / Toll Free: 1-800-707-5033
Copyright © 2014 Grab Bar Specialists, Inc.

Mon. thru Thurs. 8:00am 4:30pm / Friday 9am 3:00pm Eastern

l Contact Us | Disclaimer l Return Authorization Form l
We accept Visa, Master Card, PayPal and Discover!!!!