Straight Grab Bars
Custom Config Bars
Shower Seats
Flip-Up Safety Rails
Mounting Hardware
Collapsible Dam
Healthcraft

 

 

Home » Mounting Hardware

 Checkout
GRAB BAR MOUNTING KITS - Grab Bar Wingits  - 2 Required for Installation
Product ID: A-WINGITS

Details 

WingIt's™ Compatibility

WingIt's™ ARE compatible with most "Straight" and "Custom Configuration" Grab Bars.

Look for the WingIt™ compatability graphics

WingIt's™ come 1 per package and you will need to order two of them to mount a grab bar.

Pinnacle Innovations® introduced the WingIt™ grab bar blind fastening system. The WingIt™ is the only fastening system that can install directly into the wall board, not needing an attachment to the structural support, and surpass American with Disability Act (ADA) and all building code requirements. The adjoining pictures show an ASTM F-462 approved grab bar bending under immense load while the WingIt™ is not affected.

The WingIt™ grab bar fastening system allows for the installation of grab bars in all commercial building wall substrates in ten to fifteen minutes. Drill two holes per standard grab bar and install the WingIts™. There are no special tools or skills required.

 
  
  
  
Price: See price in product options above

WingIts Introduces the NEW APACHE200 Drill Bit
Product ID: A-WINGITS-Apache200

Details 

  • Rated at over 200 holes in ceramic wall tile
  • Eliminates the need for a hole saw and arbor to get the job done
  • 1 1/4" for use with the COMMERCIAL Grab Bar WingIt (GBW40)
  • Available in 3/4" for use with the MASTER Anchor and Bath Accessory WingIt
Price: $14.99

GRAB BAR MOUNTING KITS - Grab Bar EXTENDED Wingits   - 2 Required for Installation
Product ID: B-GBW50

Details 

EXTENDED WingIt's™ Compatibility

EXTENDED WingIt's™ ARE compatible with most "Straight" and "Custom Configuration" Grab Bars.

Look for the WingIt™ compatability graphics

WingIt's™ come 1 PER PACKAGE and you will need to order two of them to mount a grab bar.

WingIt Grab Bar Fastening Systems are made from 18/8 Stainless Steel and can be used in most hollow wall construction (see Installation Instructions). Typical straight Grab Bars use 2 GBW50s. WingIts become waterproof as they are installed into the wall. GBW50s can be installed into wall substrates (tile, drywall, etc.) from 1.5" to 2.5" thick. GBW50s use 3M's best waterproofing adhesive to install completely waterproof in minutes. 1.25" hole required for installation, use our carbide hole saw. Use with WingIts Grab Bars.

 

 
  
  
  
Price: See price in product options above

Flush-Mount ADA Code Compliant Metal Stud Backing
Product ID: METALLITE-Mounting-System

Details 

Now you can install all bathroom accessories
including grab bars and shower seats
into steel stud framing and meet code

Did you know that all fire rated facilities do not allow wood studs…only steel.

Flush-Mount Backing is the most cost effective means where
ADA Code applies and a smooth wall is needed.
No other product on the market today can accomplish this with full code compliance

Flush-Mount Backing is the most cost effective means where ADA Code applies and a smooth wall is needed. No other product on the market today can accomplish this with full code compliance

Installation Instructions

 

List Price: $20.00
Price: $15.99

GRAB BAR MOUNTING KITS - The Solid Mount  - 1 PAIR
Product ID: The-Solid-Mount

Details 

The Solid Mount Kit ( Does One Grab Bar )

The Solid Mount™ is a unique product designed for installing grab-bars into pre-existing fiberglass showers/tubs. Installation of The Solid Mount™ takes about 1 hour to complete. No more tearing apart walls to install a grab-bar. The Solid Mount™ is installed through the face of the fiberglass shower and uses a patented mounting assembly that attaches to the stud, sealing the hole and leaving a mounting surface to which a standard grab bar can be easily attached. This installation meets or exceeds A.N.S.I. and A.D.A requirements.

The Solid Mount ™ is the only Patented fastening system designed specifically for installing grab bars into a Fiberglass Shower or Tub Enclosure.

Fiberglass walls have no structural or stable support, not only will the fiberglass walls flex when pushed against but they also can crack and break over time from continual pushing or pulling.

The Solid Mount ™ allows a grab bar to be safely and securely installed into your fiberglass shower or tub enclosure, The Solid Mount ™ does not rely on the fiberglass for any of its support or strength it gets all of its support and strength from the structural studs that are already part of the walls in your home.

Each "kit" contains:
2-Mounting plates with threaded cups
2-Threaded mounting shafts
2-Lag bolts
2-Fender washers
6-Self tapping screws

(1 REQUIRED PER Grab Bar)

Mounting Instructions

IN STOCK - Usually ships within 1-2 business days
Select shipping option on checkout

Price: $23.99

GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel  - 6 Pack
Product ID: TOGGLER-SnapToggle
GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel - 6 Pack
 

Attributes of TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...

  • Cost-effective : Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
  • Strongest toggle bolt in smallest hole
  • Convenient : Allow removal of bolt or fixture without anchor falling behind wall.
  • Most reliable : Will not damage or break through wall even when vibrated.
  • Easy to Use : Pre-install without bolt.
  • Accurate : Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.
  • Quick : Can be used with a screw gun—anchor won't spin in hole.
  • 304 Stainless Steel

NOT for FLIP UPS, SHOWER SEATS or any weight bearing mounted installed items.

Good for bathroom accesqsories such as towel rings, shower baskets, towel bars & curved shower rods.

INSTALLATION INSTRUCTIONS

Price: $19.99

Buy SSL Certificate
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
   
sales@grabbarspecialists.com / Toll Free: 1-800-707-5033
Copyright © 2014 Grab Bar Specialists, Inc.

Mon. thru Thurs. 8:00am – 4:30pm / Friday 9am – 3:00pm Eastern

l Contact Us | Disclaimer l Return Authorization Form l
We accept Visa, Master Card, PayPal and Discover!!!!