Toggler

Straight Grab Bars
Custom Config Bars
Shower Seats
Flip-Up Safety Rails
Mounting Hardware
Collapsible Dam
Healthcraft

 

 

SNAPTOGGLE® Hollow-Wall Toggle Bolts// Heavy
Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors - 304 stainless steel

TOGGLER brand toggle bolts always result in the lowest possible installation cost!

TOGGLER toggle bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.

ANIMATED INSTALLATION INSTRUCTIONS

INSTALLATION OF SNAPTOGGLE® TOGGLE BOLTS

Drill 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1 7/8" (48mm). Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall.
Snap straps at wall by pushing side to side, snapping off straps level with flange of cap. Place item over flange. Insert bolt through item and tighten until flush against item, then stop.

Use machine screw or bolt to match thread in channel: BA (3/16"-24), BB (1/4"-20), BM5 (M5), or BM6 (M6).
Bolt length = item thickness + wall or ceiling thickness + 1/2" (13mm)

INSTALLATION OF TOGGLER® TOGGLE BOLTS

1. Drill a 3/4" (Ø19mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1-7/8" (48mm). 2. With one hand, pull plastic ring and hold straight so that metal channel rests flush behind wall, as you slide plastic cap along straps with other hand until flange of cap is flush with wall.
3. Place thumb between plastic straps. Push side to side, snapping off straps at wall. 4. Place item over flange. Insert bolt through item and tighten until flush against item, then stop.

Use machine screw or bolt to match thread in channel: BC (3/8"-16), BD (1/2"-13), BM8 (M8), and BM10 (M10).
Bolt length = item thickness + wall or ceiling thickness + 1/2" (13mm)

Buy SSL Certificate
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
   
sales@grabbarspecialists.com / Toll Free: 1-800-707-5033
Copyright © 2014 Grab Bar Specialists, Inc.

Mon. thru Thurs. 8:00am 4:30pm / Friday 9am 3:00pm Eastern

l Contact Us | Disclaimer l Return Authorization Form l
We accept Visa, Master Card, PayPal and Discover!!!!