Grab Bar Specialists
Cart

Home » Grab Bar Mounting Kits
 Checkout
Product ID: A-WINGITS-Apache200
WingIts' Introduces the NEW APACHE200 Drill Bit
  • Rated at over 200 holes in ceramic wall tile
  • Eliminates the need for a hole saw and arbor to get the job done
  • 1 1/4" for use with the COMMERCIAL Grab Bar WingIt (GBW40)
  • Available in 3/4" for use with the MASTER Anchor and Bath Accessory WingIt
Price: See price in product options above
Product ID: The-Solid-Mount
GRAB BAR MOUNTING KITS - The Solid Mount -  1 PAIR
Previous1 of 2Next

The Solid Mount Kit
Typical Use: Used for Fiberglass Shower or Tub Enclosure installations.

The Solid Mount™ is a unique product designed for installing grab-bars into pre-existing fiberglass showers/tubs. Installation of The Solid Mount™ takes about 1 hour to complete. No more tearing apart walls to install a grab-bar. The Solid Mount™ is installed through the face of the fiberglass shower and uses a patented mounting assembly that attaches to the stud, sealing the hole and leaving a mounting surface to which a standard grab bar can be easily attached. This installation meets or exceeds A.N.S.I. and A.D.A requirements.

Each "kit" contains:
2-Mounting plates with threaded cups
2-Threaded mounting shafts
2-Lag bolts
2-Fender washers
6-Self tapping screws

(1 REQUIRED PER Grab Bar)

Mounting Instructions

IN STOCK - Usually ships within 1-2 business days
Select shipping option on checkout

Price: $27.99
Product ID: GB00002-NDR
Mounting Hardware-no drilling required
Mounting Hardware-no drilling required

This German engineered and patented technology is the only one of its kind in the world. This system uses a simple 4 step installation process which takes just minutes to install. The adapter works on all hard surfaces. The system utilizes a single part adhesive which is resistant to heat, cold, UV. It can also be removed without any damage to the surface. The system is extremely strong and will last a lifetime when installed correctly. The only DIY grab bar solution!

Technical Specifications:

  • 2 commercial grade adapter plates with 6 stainless steel threaded screws, foam adhesive ring and protective peel away protective ring, 3-tubes of adhesive, 3-Red Roller Keys, 1-alcohol cleaning pad.
  • ADA compliant when used with nie wieder bohren grab bars
  • Tested and Passed ASTM F 446-85 Standard Consumer Safety Specification for Grab Bars and Accessories
  • Copies of testing available
  • Adapters have tested to 880lbs each in short term static load testing (each)

Installation Instructions

List Price: $45.16
Price: $36.12
Product ID: GB00004-DW
Drywall Mounting Hardware- Grab Bars
Drywall Mounting Hardware- Grab Bars
This adapter kit allows for ADA compliant security for use on drywall surfaces. Kit comes with nylon base adapter ring and 6-2-1/2" Stainless Steel screws for positive stud mounting

Technical Specifications:

  • 5mm thick nylon base rings mount between wall and grab bar. Screws are premium stainless steel. It is suggested to use two screws per flange into the stud for adequate holding power. Use GB00003 SNAP TOGGLER for end of bar which attaches to drywall only for secure mounting. This system only works with the nie wieder bohren grab bars GB3200 and GB3800 series bars.
List Price: $4.00
Price: $3.20
Product ID: PB20-1-NDR
Mounting Hardware-no drill -  CHROME

no drill Adapter for Hard Surfaces- 1 Pack for all Hukk, Klaam & Loxx items

1 Adapter with foam adhesive ring and protective peel away ring cover, 1-Tube of Adhesive, 1-Red Roller Key. The PB20 (1 pk & 2 pk) works with all the Klaam, Loxx & Hukk family items. This item is packed with all items in these families unless the option is chosen to replace with a drywall adapter. Use this as a replacement as needed if you want to relocate an existing item.

Installation Instructions

[ Not for installation on fiberglass showers ]
List Price: $10.55
Price: $10.55
Product ID: PB20-2-NDR
Mounting Hardware-no drill -  CHROME

no drill Adapter for Hard Surfaces- 2 Pack for all Hukk, Klaam & Loxx items

2 Adapters with foam adhesive ring and protective peel away ring cover, 1-Tube of Adhesive, 1-Red Roller Key. The PB20 (1 pk & 2 pk) works with all the Klaam, Loxx & Hukk family items. This item is packed with all items in these families unless the option is chosen to replace with a drywall adapter. Use this as a replacement as needed if you want to relocate an existing item.

Installation Instructions

[ Not for installation on fiberglass showers ]
List Price: $17.98
Price: $17.98
« Previous | 1 | 2 | Next »
View Cart
0 Product(s) in cart
Total $0.00
Checkout

Credit cards