Home » 1-Mounting Hardware

 Checkout
GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel  -  6 Pack
Product ID: TOGGLER-SnapToggle
GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel - 6 Pack
 

TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...
Typical Use: Used for drywall and tile installations.

  • Cost-effective : Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
  • Strongest toggle bolt in smallest hole
  • Convenient : Allow removal of bolt or fixture without anchor falling behind wall.
  • Most reliable : Will not damage or break through wall even when vibrated.
  • Easy to Use : Pre-install without bolt.
  • Accurate : Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.
  • Quick : Can be used with a screw gun—anchor won't spin in hole.
  • 304 Stainless Steel

NOT for FLIP UPS, SHOWER SEATS or any weight bearing mounted installed items.

INSTALLATION INSTRUCTIONS

Price: $19.99

WingIts' Introduces the NEW APACHE200 Drill Bit
Product ID: A-WINGITS-Apache200

Details 

  • Rated at over 200 holes in ceramic wall tile
  • Eliminates the need for a hole saw and arbor to get the job done
  • 1 1/4" for use with the COMMERCIAL Grab Bar WingIt (GBW40)
  • Available in 3/4" for use with the MASTER Anchor and Bath Accessory WingIt
Price: See price in product options above

GRAB BAR MOUNTING KITS - The Solid Mount -  1 PAIR
Previous1 of 2Next
Product ID: The-Solid-Mount

Details 

The Solid Mount Kit
Typical Use: Used for Fiberglass Shower or Tub Enclosure installations.

The Solid Mount™ is a unique product designed for installing grab-bars into pre-existing fiberglass showers/tubs. Installation of The Solid Mount™ takes about 1 hour to complete. No more tearing apart walls to install a grab-bar. The Solid Mount™ is installed through the face of the fiberglass shower and uses a patented mounting assembly that attaches to the stud, sealing the hole and leaving a mounting surface to which a standard grab bar can be easily attached. This installation meets or exceeds A.N.S.I. and A.D.A requirements.

Each "kit" contains:
2-Mounting plates with threaded cups
2-Threaded mounting shafts
2-Lag bolts
2-Fender washers
6-Self tapping screws

(1 REQUIRED PER Grab Bar)

Mounting Instructions

IN STOCK - Usually ships within 1-2 business days
Select shipping option on checkout

Price: $27.99

« Previous | 1 | 2 | Next »

Cart
Cart
0 Product(s) in cart
Total $0.00
» Checkout


sales@grabbarspecialists.com / Toll Free: 1-800-707-5033
© Copyright 2017 Grab Bar Specialists, Inc.
North Canton, OH 44709
Mon. thru Thurs. 8:00am • 4:30pm / Friday 9am • 3:00pm Eastern
| Contact Us | Disclaimer | Return Authorization Form |
We accept Visa, Master Card, AMEX, PayPal and Discover!!!!