Home » GBS - Mounting Hardware

 Checkout
GRAB BAR MOUNTING KITS - Grab Bar Wingits -  2 Required for Installation
Product ID: A-WINGITS

Details 

WingIt's™ are compatible with most "Straight" and "Custom Configuration" Grab Bars.
Typical Use: Used for drywall installations.

Look for the WingIt™ compatability graphics on our grab bar products

The WingIt™ is the only fastening system that can install directly into the wall board, not needing an attachment to the structural support, and surpass American with Disability Act (ADA) and all building code requirements.

The WingIt™ grab bar fastening system allows for the installation of grab bars in all building wall substrates in ten to fifteen minutes. Drill two holes per standard grab bar and install the WingIts™. There are no special tools or skills required.

WingIt's™ come 1 per package and you will need to order two of them to mount a grab bar.

 
  
  
  
Price: See price in product options above

MOUNTING KITS - REFINED ENGINEERED SAFETY
Product ID: WINGITS-MAW35

Details 

Look for the WingIt™ compatability graphics on our grab bar products

MASTER Anchor - The World's Strongest Fastener
  • Great for mounting most bath accessories, shelving, draperies and so much more!
  • Can even be used in holes created when other fasteners fail!
  • Fire Retardant, Structural Plastic & Stainless Steel Construction
  • Handles vector forces 360˚
  • Objects can be easily removed or replaced

WingIts - World's Strongest FastenerTM - WingIts are rated up to 300 lbs. (depending on application) and will never Loosen. Millions of installations and No Issues. WingIts utilizes a #8 stainless steel screw, which is ideal for installing Bath Accessories, Window Dressings and Shelving. Typical installations include Bath Accessories, Window Dressings, Mail Boxes, Hose Reels, Heavy Drapery Rods, Shelving, Cabinets, Pedestal Sinks, Dispensers, Coat Hooks, Railings, and for most Wall Mount Accessories with a base over 1 in. made in USA.

MADE IN USA

Price: $3.95

EXTENDED Wingits  -  2 Required for Installation
Product ID: B-GBW50

Details 

EXTENDED WingIt's™ are compatible with most "Straight" and "Custom Configuration" Grab Bars.
Typical Use: For thick drywall and/or Tile installations.

Look for the WingIt™ compatability graphics on our grab bar products

WingIt Grab Bar Fastening Systems are made from 18/8 Stainless Steel and can be used in most hollow wall construction (see Installation Instructions). Typical straight Grab Bars use 2 GBW50s. WingIts become waterproof as they are installed into the wall. GBW50s can be installed into wall substrates (tile, drywall, etc.) from 1.5" to 2.5" thick. GBW50s use 3M's best waterproofing adhesive to install completely waterproof in minutes. 1.25" hole required for installation, use our carbide hole saw. Use with WingIts Grab Bars.

 

 

 

WingIt's™ come 1 PER PACKAGE and you will need to order two of them to mount a grab bar.

 
  
  
  
Price: See price in product options above

 
Product ID: METALLITE-Mounting-System

Details 


THE COMPLETE SYSTEM FOR METAL STUD FRAMING
Now you can install all bathroom accessories including grab bars and shower seats
into steel stud framing and meet code

LIST PRICE $ 20.00 EA
(16 Gauge)
(Includes 8 self tapping screws)


Special $15.99

Grab Bars

Seats

Seats

Did you know that all fire rated facilities do not allow wood studs…only steel.

This includes but is not limited to the following:

Public Buildings
Public Establishments
Schools
Hospitals
Any Building over 4 stories tall
Any Federal Building

Flush-Mount Backing is the most cost effective means where ADA Code applies and a smooth wall is needed.
No other product on the market today can accomplish this with full code compliance
Installation Instructions

Flush-Mount Backing is the only product on the market today to meet the requirements of the with Disabilities Act Accessibility Guidelines 4.26(ADAAG), the BOCA (1999), Standard Code (1997) and UBC (1997) model building codes, the International Building Code 2000, and both the ICC/A117.1-2003 Section 609 (Grab Bars) Section 610 (Seats) and ANSI /ASCE 7-98 Standards Flush-Mount is the only product ever tested to UL Standards requiring 250 pull/point load for handrails, grab bars and seats.

 

List Price: $20.00
Price: $15.99

GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel  -  6 Pack
Product ID: TOGGLER-SnapToggle
GRAB BAR MOUNTING KITS - Snap Toggle bolts - Stainless Steel - 6 Pack
 

TOGGLER brand toggle bolts that make them superior to conventional toggle bolts, such as wing toggles or gravity toggles...
Typical Use: Used for drywall and tile installations.

  • Cost-effective : Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
  • Strongest toggle bolt in smallest hole
  • Convenient : Allow removal of bolt or fixture without anchor falling behind wall.
  • Most reliable : Will not damage or break through wall even when vibrated.
  • Easy to Use : Pre-install without bolt.
  • Accurate : Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.
  • Quick : Can be used with a screw gun—anchor won't spin in hole.
  • 304 Stainless Steel

NOT for FLIP UPS, SHOWER SEATS or any weight bearing mounted installed items.

INSTALLATION INSTRUCTIONS

Price: $19.99

« Previous | 1 | 2 | »

Cart
Cart
0 Product(s) in cart
Total $0.00
» Checkout


sales@grabbarspecialists.com / Toll Free: 1-800-707-5033
© Copyright 2017 Grab Bar Specialists, Inc.
North Canton, OH 44709
Mon. thru Thurs. 8:00am • 4:30pm / Friday 9am • 3:00pm Eastern
| Contact Us | Disclaimer | Return Authorization Form |
We accept Visa, Master Card, AMEX, PayPal and Discover!!!!